www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부 또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
（
1
）
Remove the Test Leads.
（
2
）
Press
key to enter into MEM function. When the Main Screen displays
in the lower right part, the
Instrument will read the last record in default setting.
（
3
）
Press
key to recall next data; press
key to recall the remain contents of present data.
Note: when no data saved, the Main Screen displays
――――
, the memory number in the auxiliary part is 0.
（
4
）
Press
key to exit from the MEM function.
How to
delete
the data
The saved data can be
delete
on the Main Screen according to following sequence.
Warning
To avoid electrical shock, remove the Test Leads off in MEN function.
（
1
）
Remove the Test Leads.
（
2
）
Press
key to enter into MEM function. When the Main Screen displays
in the lower right part, the
Instrument will read the last record in default setting.
（
3
）
Press
key, the Main Screen displays mark to enquire whether to delete data or not. For YES, repress
key, and the Main Screen displays I mark to ensure deleting data in this part. The Main Screen shows mark
“
----
”
after 1 second, and the buzzer beeps a sound to indicate finishing deletion; For NO, press any other key to cancel
deletion work.
（
4
）
Press
key to exit from the MEM function.
Section Seven
Instrument setting
