www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부 또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
See relevant part for different measurement methods for test leads connections.
Rk residuals can not be obtained when mark
displays.
Step three: press Key to enter into Rk residual resistance mode, the Main Screen displays Rk mark in the
upper-left part, and
in the lower-right part.
Figure 5
Step four: press TEST Key to measure Rk;
Step five: press
Key to save Rk value, and the Main Screen displays SAVE mark in the lower-left part.
Note: the Rk value will be saved in the Instrument after powering off.
The residual resistance value is valid in all resistance range;
The Main Screen displays OL if Rk is more than 5.00
Ω (see figure 6);
At this time, press
Key to display
“
”
mark indicating no saving.
