Runco VIDEOXTREME VX-8D, Installation & Operation Manual

Page: 25 / 108

Controls and Functions
Runco VX-8d Installation/Operation Manual 9
PRE
L
IMINAR
Y
7. RIGHT BUTTON
Used to direct-select inputs or move the menu cursor right in the OSD. When no
menus are present on-screen, the
RIGHT button toggles through the different
sources, in this order:
Composite Video - S-Video 1 - S-Video 2 - Component - HD 1 - HD 2 - SCART -
HDMI 1 - HDMI 2
8. MENU BUTTON
Press the MENU button to bring up the main menu, or to exit the current menu and
return to the previous one.
9. UP BUTTON
Use to direct-select aspect ratios or move the menu cursor up in the OSD. When no
menus are present on-screen, the
UP button toggles through aspect ratios in the
following order:
Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9
10. ENTER BUTTON
When an item is highlighted on the OSD, the ENTER button selects the item.
11. S TANDBY LED
Lights amber when the DHD Controller is in standby mode; otherwise it is off.
2.4
DHD Controller Rear
Panel Figure 2-4 shows the rear connector panel on the DHD Controller.
Figure 2-4. DHD Controller Rear Panel
Outputs 1. HDMI Out
Connect this to the DHD Input on the VX-8d (see Figure 2-2).
2. Di s play Control
Connect this to the R S -232 input on the VX-8d, using the provided communication
cable.
3. TRIGGER S
Connection for up to three (3), 12-volt trigger-controlled devices such as retractable
screens, screen masks or a CineWide with AutoScope system. Output current is
limited to 250 milliamperes (mA).
1 5 6 4 14
2 3 10 11
7 8 9
12 13