Runco VIDEOXTREME VX-8D Installation & Operation Manual Download Page 20

Page: 20 / 108

Introduction

Runco VX-8d Installation/Operation Manual

PRE

IMINAR

Key Features and Benefits

The VX-8d offers these key features and benefits:

• Native Resolution: 1280 x 720 (16:9 Native Aspect Ratio)

• Three-chip Digital Light Processing (DLP™) system

• Two HDMI Inputs (on DHD Controller) with High-bandwidth Digital Content Protection

(HDCP)

• HDTV Compatible

• CinOptx™

Proteus

lens options for stunning sharpness and throw distance flexibility

Parts List

Your VX-8d is shipped with the following items. If any items are missing or damaged,
please contact your Runco dealer or Runco Customer Service at (800) 23RUNCO.

• VX-8d DLP Home Theater Projector and DHD Controller

• Remote Control Unit and two (2), AAA-size batteries

• AC Power Cords (2)

• Serial Port Adapter, RJ-11 Female to DB-9 Male

• RJ-11 Telephone Cable, 50 feet (15.24 meters)

• HDMI-to-HDMI Cable, sold separately (refer to

Optional Accessories

, below)

• Rack-mount hardware for the DHD Controller

• Runco VX-8d Installation/Operation Manual (this document)

• Runco VX-8d Quick Setup Guide

Optional Acce

orie

• CineWide™ technology (fixed, secondary anamorphic lens)

• CineWide™ with AutoScope™ system (secondary anamorphic lens and motorized

mount)

• Replacement Lamp (part number 997-5353-00)

• Ceiling mount kit (part number 956-0074-00)

• HDMI-to-HDMI Cable, length specified at time of order:

• 16.4 feet (5.0 meters) (part number 903-1010-00)

• 24.6 feet (7.5 meters) (part number 903-1011-00)

• 32.8 feet (10.0 meters) (part number 903-1012-00)

• 49.2 feet (15.0 meters) (part number 903-1013-00)

• 65.6 feet (20.0 meters) (part number 903-1014-00)

➤

Summary of Contents for VIDEOXTREME VX-8D













































































































Search results

Summary of Contents for VIDEOXTREME VX-8D

Reviews:

Brands by name

Popular brands

Runco VIDEOXTREME VX-8D, Installation & Operation Manual

Search results

Summary of Contents for VIDEOXTREME VX-8D

Reviews:

Brands by name

Popular brands