Runco VIDEOXTREME VX-8D, Installation & Operation Manual

Page: 24 / 108

Controls and Functions
8 Runco VX-8d Installation/Operation Manual
PRE
L
IMINAR
Y
2.3
DHD Controller Front
Panel Figure 2-3 shows the controls and indicators on the DHD Controller front panel; the
paragraphs that follow describe them.
Figure 2-3. DHD Controller Front Panel
1. RUNCO ICON
Lights blue to indicate that the controller is on or powering up.
2. IR S EN S OR
Receives IR commands from the remote control.
3. VACUUM FLUORE S CENT DI S PLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected
menu or – if no menu is selected – the connected display device model, current
source, input resolution and aspect ratio.
4. ON/ S TANDBY BUTTON
Press once to toggle from standby mode to on mode. Press it again to return to
standby mode. For a discrete on or off command, you can use the direct access
buttons on the remote control.
5. LEFT BUTTON
Used to direct-select inputs or move the menu cursor left in the OSD. When no menu
is present on-screen, the
LEFT button toggles through the different sources, in this
order:
HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component - S-Video 2 - S-Video 1 -
Composite Video
6. DOWN BUTTON
Use to direct-select aspect ratios or move the menu cursor down in the OSD. When
no menu is present on-screen, this button toggles through the different aspect ratios,
in this order:
16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema - Native
ratio
ratio
i
n
p
u
t
standby
m
e
n
u
i
n
p
u
t
enter
3
HDMI 1
16:9 1080i/60
3 1
9 10 11
6 5 4 8 7 2
VX-8d
Virtual Cinema is available only on the VX-8d/CineWide or
VX-8d/CineWide with AutoScope. For more information about
aspect ratios, refer to Table 4-1.
Note