Runco Reflection RS-440, User Manual

Page: 53 / 84

Operation
Runco RS-440 Installation/Operation Manual 39
PRE
L
IMINAR
Y
Source Select Choose Source Select from the Main Menu to switch video sources.
The active source is indicated by an arrow to its left; in this example, Video is the active
source. To select a different source, use the
or button to highlight it and press
ENTER .
Picture Adjust Use the controls in the Picture Adjust menu to calibrate your RS-440 for optimum picture
quality. To access the Picture Adjust menu, press
MENU , highlight Picture Adjust and
press ENTER .
To adjust a setting, use the or button to highlight it and press ENTER . Use the
or button to change the setting. When finished, press EXIT .
The RS-440 has been designed to incorporate setup and calibration standards
established by the Imaging Science Foundation (ISF). The ISF has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
recommends that setup and calibration be performed by an ISF certified installation
technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately.
Although it may be possible to obtain satisfactory picture quality using the naked eye and
regular program material, Runco recommends using the following calibration tools for best
results:
• External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test
DVD or equivalent.
• A blue filter (provided with many test DVDs), for color level and tint adjustments.
Connect your test pattern source to the input that you are calibrating and proceed as
follows.
Perform the adju s tment s in the order li s ted here.
Picture Memory: For each input, the RS-440 lets you store picture quality settings as
presets that you can recall at a later time. You can create up to three presets per input
and resolution, to accommodate changing lighting conditions or viewer preferences.
To recall a picture memory preset, highlight Picture Memory in the Picture Adjust menu
and press
ENTER . Then, press or to select “Custom,” “ISF Night” or “ISF Day” and
press ENTER again.
S ource
➨
Video
S -Video
Component
HDMI
DVI-D
DVI-A
Picture Adju s t
Picture Memory Cu s tom
Brightne ss 0
Contra s t 0
Color 0
Tint 0
S harpne ss 3
Gamma 2.2
Color Temp. 6500
Color S pace Auto
BrilliantColor™ Off
Black Level 0 IRE
S ave S etting s
Re s et to Default s