Runco Reflection RS-440, User Manual

Page: 27 / 84

Installation
Runco RS-440 Installation/Operation Manual 13
PRE
L
IMINAR
Y
3.2
Quick Setup Table 3-1 gives a quick overview of the RS-440 installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. In s tallation Overview
S tep Procedure
For Detail s , Refer to
page...
1
Choose a location for the projector 14
2
If in s talling an R S -440LT/CineWide: Install CineWide
lens base plate (optional)
20
3
Mount the projector 22
4
Connect signal sources to the RS-440 23
5
Connect external controller to RS-232 port (optional) 28
6
Connect 12-volt trigger output to retractable screen or
other, 12-volt trigger-activated equipment (optional) 29
7
Apply power to the projector 29
8
Change the OSD Language (optional) 30
9
For rear-screen and/or ceiling-mount installations, select
the proper picture orientation 30
10
Primary lens adjustments: projected image size (zoom),
position (shift) and focus 17, 31
11
Install CineWide anamorphic lens (optional) 33
12
CineWide lens adjustments: position, pitch (angle),
geometry and focus 33
13
Projector calibration: adjust the following for each input ;
save settings when finished:
Aspect ratio
Brightness
Contrast
Color level
Tint
Input position
44 through 49
Note