Runco High Definition, Owner'S Operating Manual, Page: 69 / 82

Serial Communications
PlasmaWall XP Series Owner’s Operating Manual 57
PRE
L
IMINAR
Y
Picture Adju s t Command s (not available on HDMI 1 or HDMI 2 input s )
BRIGHTNESS -100/100 YES Sets a value for brightness
BRIGHTNESS? NA NA Returns brightness setting value
CHROMADELAY -12/12 YES Sets a value for input color chroma delay
CHROMADELAY? NA NA Returns input color chroma delay setting
COLOR -100/100 YES Sets a value for color
COLOR? NA NA Returns color setting value
CONTRAST -100/100 YES Sets a value for contrast
CONTRAST? NA NA Returns contrast setting value
FILMMODE 0/1 YES Sets Film Mode off (0) or on (1)
FILMMODE? NA NA Returns Film Mode setting (0 = off; 1 = on)
FILTER 0/15 YES Sets a value for input color noise filter
FILTER? NA NA Returns input color noise filter setting
PHASE 0/3 YES Adjusts phase
PHASE? NA NA Returns phase setting value
SHARPNESS -6/6 YES Sets a value for sharpness
SHARPNESS? NA NA Returns sharpness setting value
TINT -100/100 YES Sets a value for tint
TINT? NA NA Returns tint setting value
Memory Pre s et Command s
CUSTOM1 NA YES Loads “Custom 1” image preset
CUSTOM2 NA YES Loads “THX” (“Custom 2”) image preset
PRESET? NA NA Returns currently-selected preset
(ISF Day, ISF Night, Custom 1 or
THX/Custom 2)
DAY NA YES Loads “ISF Day” image preset
NIGHT NA YES Loads “ISF Night” image preset
Table 6-1. S erial Command s (continued)
Command
Parameter
(min/ma x )
Value
S tored?
De s cription