Controls and Functions
14
PlasmaWall XP Series Owner’s Operating Manual
PRE
L
IMINAR
Y
10.
A
s
pect Ratio
S
election Button
s
Use the red buttons to select an aspect ratio directly or to enter numeric characters,
as follows:
16 : 9 (3)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4 : 3 (6)
Scales the input signal to fit 4:3 display mode in the center of the screen.
LETBOX (Letterbo
x
) (9)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
V-WIDE (VirtualWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower
portions are masked.
S
VC
Not used.
11.
S
-VID 1 (4) /
S
-VID 2 (5) (
S
-Video)
Press to select an S-Video input or to enter the numeric character “4” or “5.”
12.
HD 1 (7) / HD 2 (8)
Press to select a HD (RGBHV or YPbPr component) input or to enter the numeric
character “7” or “8.”
13.
HDMI 1 / HDMI 2 (0)
Press to select a Digital Video input. Press
HDMI2
to enter the numeric character “0.”
14.
Memory Pre
s
et Button
s
:
I
S
F NI
G
HT
Press to recall settings for the current input from the “ISF Night” memory preset.
I
S
F DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
CU
S
T 1
Press to recall settings for the current input from the “Custom 1” memory preset.
THX / CU
S
T 2
Press to recall settings for the current input from the “THX” or “Custom 2” memory
preset.