Hardware Manual
Chapter 3 Product Installation
3-3
During the installation, place the front panel of the switch to the rack. For the satefy
purposes, screw up the distributed screws as shown in the Figure3-1.
Figure3-1
2. With handles contained:
First, fasten the accessory provided in the carton for rack mounting to both sides of the
switch. Then mount the switch to a standard 19-inch rack. You can install with the attached
two L-shaped handle fixtures and M3*6FMO sunk screws.
Step 1
Press on the two fixtures with handles onto both sides of the switch, and fix
them with M3*6FMO sunk screws. See the Figure3-2.
Step 2
Fasten the switch onto the rack, as shown in the Figure3-3. The screws needed
for rack mounting shall be prepared.
Figure 3-2 Installing the fixtures
Summary of Contents for RG-S2900 Series
Page 1: ...Installation Manual RG S2900 Series Full Gigabit Security Intelligent Access Switch...
Page 4: ......
Page 12: ......
Page 24: ......
