Hardware Manual
Appendix A Connectors and Connection Media
A-1
A
Connectors and Connection Media
A.1
1000BASE-T/100BASE-TX/10B
ASE-T Port
The 1000BASE-T/100BASE-TX/10BASE-T is a port that supports adaptation of three rates,
and automatic MDI/MDIX Crossover at these three rates. The 1000BASE-T complies with
IEEE 802.3ab, and uses the cable of 100-ohm Category-5 or Supper Category-5 UTP or
STP, which can be up to 100m. The 1000BASE-T port uses four pairs of wires for
transmission, all of which must be connected. Figure A-1 shows the connections of the
twisted pairs used by the 1000BASE-T port:
Figure A-1
Schematic diagram for the four twisted pairs of the 1000BASE-T
Straight-Through
Crossover
In addition to the above cables, the 100BASE-TX/10BASE-T can also use 100-ohm
Category-3, 4, 5 cables for 10Mbps, and 100-ohm Category-5 cables for 100Mbps, which
can be up to 100 m. Figure A-2 shows the pinouts of the 100BASE-TX/10BASE-T:
Summary of Contents for RG-S2900 Series
Page 1: ...Installation Manual RG S2900 Series Full Gigabit Security Intelligent Access Switch...
Page 4: ......
Page 12: ......
Page 24: ......
