grounded in the building. For common buildings, the neutral points have been buried into the ground during
construction and wiring. You must verify if the power supply of the building has been properly grounded.
3.3.2 Installing the Power Cable
The following table describes the procedure for installing the power cable:
5.
Verify that the router switch is off. Connect one end of the supplied power cable to the socket on the rear panel of
the cabinet and the other end to the AC power socket.
6.
Switch the router to power on position.
7.
For the RSR20-X-28 series router, verify that the PWR indicator on the front panel is on. If so, it indicates that the
power cable is correctly connected.
8.
9.
To ensure the tight connection between the power cord and the router, please install the power cord buckle.
1)
Insert the buckle into the mounting hole for the power cord buckle, as shown in
错误
!
未找到引用源。
.
Figure 3-4 Inserting the Buckle into the Mounting Hole
10.
2)
Through the buckle, plug the power cord into the router.
