5 Troubleshooting
5.1 Power Troubleshooting
You may use the power indicator on the front panel to decide if the power supply system is operating normally. For
description of indicators, see Chapter 1. If a fault occurs, check the following items:
If RG-WS6008 power switch is in the on position.
If the power supply is turned on.
If the power cord is connected correctly.
If the power supply meets the requirements.
Never attempt hot swapping of the power cord. If the steps above did not solve your problem, contact your local
distributor or technical support personnel.
5.2 System Troubleshooting
If the system is operational, relevant information is displayed on the terminal as described in chapter 4. Otherwise, nothing
or gibberish is displayed. If nothing is displayed, please check the following items:
Verify whether the system power supply is operational.
Verify whether the cable is connected to the console port correctly.
If there is still nothing displayed, it may be due to improper cable connection or incorrect parameter settings. Please
change the parameter settings.
If gibberish is displayed, it may be caused by incorrect parameter settings. Please check the following parameters:
Baud rate: 9600
Data bit: 8
Parity check: None
Stop bit: 1
Flow control: None
Terminal emulation: VT100
If the console port parameters are changed, it may cause no display on the terminal.
