Verifying the Power Supply
The AP can be powered either with a 48V DC power adapter or through Power over Ethernet (PoE).
PoE
When using PoE, verify that the power supply equipment is IEEE 802.11af PoE compliant, and the Ethernet cable is
connected to the Ethernet port on the AP. Figure 3-6 shows the location of the Ethernet port on the AP.
Figure 3-6 Ethernet Port
Note
1.Reset button
2.Console port
3.Copper port LED
4.10/100/1000Base-T auto-sensing Ethernet port
5. Nameplate
6. Power port
Power Adapter
When using a power adapter, verify that it meets the recommended specifications, and the adapter is plugged in the
power port.
Verifying the Operation
After the AP is powered on, observe the LED on the cover and front panels to verify its operation.
Figure 3-7 LED Indicators
