Network cables are in place.
The installation site meets all described requirements.
The custom AP meets the customers’ requirements.
Install antennas at least 7.9 inch (20 cm) away from human bodies.
Keep the AP away from microwave ovens that may cause signal interference.
Do not install the AP outside the buildings.
The AP must be connected to PoE IEEE 802.3af compliant power source or a CCC certified power source.
Precautions
To avoid damages to the AP, observe the following safety precautions:
Install the device in a well-ventilated location.
Do not subject the device to high temperatures.
Keep away from high voltage cables.
Install the device indoors.
Do not expose the device in a thunderstorm or strong electric field.
Keep the device clean and dust-free.
Disconnect the device before cleaning it.
Do not use a damp cloth or liquid for cleaning.
Do not open the enclosure when the AP is working.
Make sure the output voltage of the adapter matches the specifications.
Fasten the device tightly.
Make sure all antennas are connected before powering up the device.
Verify the device is properly installed before powering the device either with a PoE switch or through a surge
protector.
Do not operate your wireless network device near unshielded blasting caps or in an explosive environment.
Make sure all antennas are connected or not in a transmit state before powering up the AP.
Before connecting an external power supply, make sure the power supply is compatible with the power module of the
device.
Before connecting a power cord, make sure the power switch is turned off.