Cutting Centre SR 2 Turbo
13
Remove any objects lying on the machine.
Remove the undercarriage with the Euro boxes from the lifting
aid and from beneath the cut meat discharge.
Remove the slider (funnel closure).
Remove the die plate.
Open the knife protection box.
Unscrew the handle nut.
Remove the cut-off knife and the grate frame with the knife lev-
els.
Remove the transport belt. Proceed as follows:
o
Open the quick-action tape clamp by jerking it upward and
then fold it onto the belt frame.
o
Reach with one hand under the belt to the feather key. Lift
it from the guide groove and remove the transport belt.
o
Remove the upper belt section.
Open the tool magazine and remove the objects it contains
(grate, knife levels, stabilisers and possibly the knife sharpener).
5
Service: Care, maintenance, repair
Any work related in any way with service may be carried out only by
Rühle service technicians and by persons authorised by Rühle in writ-
ing. In this regard, a distinction is made between regular care and
maintenance and repair. The respective qualification certificate must
be issued explicitly for the corresponding work.
Follow also the safety instructions in Chapter 1.1!
Notify and obtain permission from Rühle customer service
if welding or cutting work is required on the machine!
Wear cut protection gloves when working on the blades!
Reaching into the inside of the machine by opening the
side covers is strictly prohibited when performing work
activities of “Regular Care”!
