manualshive.com logo in svg

Rugged CCTV Workhorse 120-4, Operating Instructions & User Manual, Page: 38 / 161

Share
Download
Rugged CCTV Workhorse 120-4 Operating Instructions & User Manual Download Page 38

 

37 

4-6. System Log  

Workhorse 120-4 records the logs of all operations including system power ON/OFF, system setup 

in/out, and network connection/disconnection. 

 

4-6-1. Log Type 

(1) General 

Logs related to power ON/OFF, file copy/backup failure, setup start/end, play, and other basic 
system operations 

(2) Recording event 

Logs related to recording such as detection of motion, sensor, and sound 

(3) Network 

Logs related to network operations such as network login, network logout, and network live 

(4) Failure 

Logs related to operation failures such as signal loss and network connection failure 

(5) All 

Logs related to all system operations 

 

4-6-2. Viewing the System Log 

 

In real-time monitoring mode, press the 

[Log]

 button on the remote control or 

[Log]

 button on 

the menu. 

 

The initial menus of the log list are then displayed as shown below: 

 

 

 

 

Summary of Contents for Workhorse 120-4


































































































































































Reviews:

No comments