ruegg CLASSIC-LINE, Instruction Manual, Page: 22 / 28

CLASSIC-LINE
ECO-LINE
Instruction manual
22
Maintenance
Wait until the system has completely cooled down
before any maintenance operations.
Protect the chimney enclosure and the flooring.
Door hinge-side guide (figure 1)
The door hinge-side guide should be cleaned and
lubricated at least twice a season and more frequently if
the fireplace is used intensively.
Proceed as follows:
1 Raise the glass door completely
2 Use a cloth to clean the visible part of the inner
surface of the C-shaped profile
3 Lubricate the whole of the inner surface of the C-
shaped slide, with the Rüegg DW-40 multi-spray
provided in the installation kit
4 Lower the door and open it
5 Lubricate the upper and lower guides using
the Rüegg DW-40 multi-spray provided in the
installation kit
6 Close the door and slide it fully up and down a few
times
7 Repeat operations 3 and 5 if necessary
8 Use a cloth to wipe off any Multispray that might have
collected at the end of the C-shaped slide
Door lock-side guide (figure 2)
The door lock-side rollers should be cleaned and
lubricated at least twice a season and more frequently if
the fireplace is used intensively
Proceed as follows:
1 Open the door (instructions on page 19)
2 Use a cloth to clean the upper and lower rollers.
3 Lubricate the upper and lower rollers using
the Rüegg DW-40 multi-spray provided in the
installation kit
4 Turn each roller several times in both directions
5 Use a cloth to wipe off any Multispray that has
collected
Grill holding socket (Figure 3)
Depending on the frequency of use, the grill holding
socket should be cleaned at least once or twice a year,
using a vacuum cleaner and then lubricated with
the Rüegg DW-40 multi-spray.
C-shaped slide
Guide roller
Figure 1
Figure 2
Upper roller
Lower rollers
Grill holding socket
Figure 3