15
Preparing for Installation
Point to Point Bridge Configuration
Figure 7.
Sample configuration in the Internet Protocol (TCP/IP) Properties dialog box
Step 4: Connect the Wireless Bridge to the Admin
Computer
If you have not already done so, connect the admin computer to the ZoneFlex 7731 using
an Ethernet cable, or two Ethernet cables and a PoE injector if you are using Power over
Ethernet (see
“Connect the Ethernet cables and power adapter to the PoE injector”
on
page 12
).
Step 5: Log In to the Web Interface
1.
Open a Web browser window from the admin computer.
2.
In the address or location bar, type the following address:
Root Bridge
: http://192.168.2.1
Non-Root Bridge
: http:/192.168.2.254
3.
Press
<Enter>
on the keyboard to connect to the Wireless Bridge’s Web interface. A
security alert message appears.
4.
Click
Yes
or
OK
(depending on the browser) to continue. The Wireless Bridge’s login
page appears.
