8
Before You Begin
Get to Know the Hardware Features
Aiming Mode
In Aiming Mode, LED 1 indicates that the Wireless Bridge is in Aiming Mode. LED
indicators 2 - 6 are used together to indicate signal strength, and should be read from
bottom to top (the higher the LEDs go, the stronger the signal).
In Aiming Mode, each LED has three states to represent different values. Solid yellow
indicates the highest value, flashing yellow indicates medium value and off indicates the
lowest value. If all six LEDs are solid yellow, the Wireless Bridge has the strongest signal
possible. If some LEDs are flashing yellow or off, reposition the Wireless Bridge to achieve
a better signal. For more detailed information on signal strength levels, see
“RSSI values
of LED indicators”
on
page 50
.
Push Buttons
The ZoneFlex 7731 includes two push buttons:
■
A recessed factory default reset button (located inside the bottom panel)
■
A large blue Aiming button that sets the bridge to Aiming Mode (located on the
outside of the unit)
To reset the unit to its factory defaults, press and hold the Reset button for six (6) seconds.
Press and hold the blue Aiming button for four (4) seconds to initiate aiming between the
Root and Non-Root Bridges.
LED 5 & 6 (P0 and P1)
Alternating Blinking = Provisioning in process, role is unknown
Simultaneous Blinking = Provisioning complete; reboot pending
Table 3.
Aiming Mode LED indicators
LED
Meaning
LED 6
Signal strength 5
LED 5
Signal strength 4
LED 4
Signal strength 3
LED 3
Signal strength 2
LED 2
Signal strength 1
LED 1 (AIM/PWR)
Solid Yellow = Aiming Mode (RSSI >= 5)
Solid Green = Normal Operation Mode
Off = Off
Table 2.
Normal Operation Mode LED indicators
LED
Meaning
