6
Before You Begin
Get to Know the Hardware Features
Table 1.
LEDs and bottom panel connectors
No
Label
Description
1
LEDs
See
“LED Colors and What They Mean”
below for more
information.
2
RJ45
LAN port that supports Power over Ethernet (PoE) and 10/
100/1000 Mbps network connections.
3
Reset
Using a pointed object (for example, a pen), press this
button to restart the Wireless Bridge or to restore it to
factory default settings:
• To restart the Wireless Bridge, press the Reset button
once.
• To restore the Wireless Bridge to factory defaults, press
and hold the Reset button for six (6) seconds.
WARNING: Restoring the Wireless Bridge to factory
default settings removes all configuration changes that
you have made. These include the IP address, password,
access control list, and wireless settings. Returning the
configuration of these features to their factory default
settings may result in network connectivity issues.
4
12V DC
In addition to PoE, you can also use DC power (from a
battery, for example) to supply power to the Wireless
Bridge.
5
Aiming Button
Press this button to set the Wireless Bridge to Aiming
Mode. When Aiming Mode is set, the LEDs can be used
to determine signal strength. See
“Aiming Mode”
for
more information.
