T811-CM AP Installation Guide, 800-71436-001 Rev A
21
Installing the T811-CM
8
5 GHz
•
Off:
The 5GHz WLAN service is down.
•
Solid amber:
The 5GHz WLAN service is up, but no clients are associated/
connected.
•
Solid green:
The 5GHz WLAN service is up and at least one client is associated.
9
USB Port •
USB port for IoT devices, such as BLE Smart Beacon, Gimbal, Zigbee/Thread
dongle, etc.
•
Max Dimensions: 6cm x 2cm x 1.1 cm
•
Max Weight: 8 ounces
•
Max Power: 450 mW (SiLabs EM3578 max current draw at +20 dBm is 80mA
over a 3.3V rail)
•
Interface: USB 2.0
•
Connector: USB Type-A plug
10 Eth Port /
Reset
Button
•
1 x 10/100/1000 PoE Out port (802.3at)
•
Supports PoE PSE (802.3at) 30W
•
Reset Button: Depress quickly to reboot both the AP and the CM (4 sec or
less). Press and hold for 5-10 seconds to perform a full reset to factory default
settings.
11 SFP Fiber
interface
•
Supports hot swappable SFP module
•
Supports the following SFP modules:
•
Finisar GPON FTGN2117P2TUN
•
Finisar EPON FTEN2217P1CUN-BC
•
Finisar 1000BaseLX FLTF1318P3BLT
•
Xavi XO-3901 GPON ONT (***XXX*** need to verify)
•
(***XXX*** add SFP LED behavior)
Summary of Contents for T811-CM
