Q910-US00 User Guide
Part Number: P01-Q910-US00
11
Physical Installation of Q910
• Q910 AP Installation....................................................................................................................................... 13
Q910 Access Point Installation
This section covers steps involved in assembling and installing a Q910 Access Point (AP) on strand mounts.
This Quick Setup Guide provides step-by-step instructions on how to set up your Ruckus Small Cell
™
Q910 AP. After completing the
steps described in this guide, you will be able to place the Q910 at your site and provide LTE wireless network access to users.
FIGURE 1 Ruckus Small Cell Q910 Access Point
Before You Begin
The AP box shipped to you must be come with everything required to mount and power up the AP. Check the package contents as
follows:
•
Q910 LTE Access Point
•
Two M25 data cable glands
•
Outdoor AP Mounting Bracket Kit, consists of:
–
Mounting bracket
–
U-joint bracket
–
Long (175mm) linkage bracket
–
Short (100mm) linkage bracket
–
AP bracket
–
Four (4) hose clamps
–
Packet of screws, washers, and other hardware
•
Safety cable kit