Ruckus Wireless ICX 7850 Series, Hardware Installation Manual

Page: 25 / 102

Ruckus ICX 7850 Switch Hardware Installation Guide 15
Part Number: 53-1005580-01
Mounting the Device
•
Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
•
Precautions Specific to Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
•
Installing the Device on a Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
•
Installing the Device in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
•
Two-Post Rack Mount Installation (ICX-RMK-4POST-TL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
•
Four-Post Rack Mount Installation (ICX-RMK-4POST-TL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
•
Installing the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295). . . . . . . . . . . . . . . . . . . . . . . . 24
•
Connecting Devices in a Stack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Mounting Options
You can install the Ruckus ICX 7850 in the following ways:
•
As a standalone unit on a flat surface.
•
In a two-post Telco rack using a flush-mount rack kit. The two-post rack mount ears are included with the switch and support
various mounting positions (refer to
Figure 7 ).
•
In a four-post EIA rack using the flush-mount rack kit (ICX-RMK-4POST-TL) included with the switch. The rack kit can be used
to install devices in EIA racks that are between 46 cm and 79 cm (18 in. to 31 in.) deep.
•
In a four-post EIA rack using the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295). The rack kit can be
used to install devices in EIA racks that are between 61 cm and 81 cm (24 in. to 32 in.) deep.
Precautions Specific to Mounting
The following precautions specifically apply to mounting the device.
DANGER
Use safe lifting practices when moving the product.
CAUTION
Make sure the rack housing the device is adequately secured to prevent it from becoming unstable or falling over.
CAUTION
Make sure the airflow around the front and sides of the device is not restricted.
CAUTION
Never leave tools inside the device.