Ruckus ICX 7850 Switch Hardware Installation Guide
35
Part Number: 53-1005580-01
Mounting the Device
Connecting Devices in a Stack
1.
Attach the right rear bracket to the right front rack post using two 10-32 x 5/8-in. screws and two retainer nuts, as shown in
. Use the upper and lower holes in the bracket.
2.
Attach the left rear bracket to the left front rack post using two 10-32 x 5/8-in. screws and two retainer nuts. Use the upper and
lower holes in the bracket.
3.
Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg).
FIGURE 27
Attaching the Rear Brackets to the Front Rack Posts
Connecting Devices in a Stack
The Ruckus ICX 7850 can operate as a standalone device or as a member of a stack. A stack is a group of devices—Ruckus stackable
units and their connected stacking links—that are connected so that the stack is managed as a single entity.
You can mix any Ruckus ICX 7850 models together in a stack. A stack cannot contain other device types.
Stacking Ports
There are eight 100-GbE QSFP28 ports on the front panel of the Ruckus ICX 7850 that can be used as stacking ports.
The following figure shows the stacking ports on the Ruckus ICX 7850-32Q.
1
Screws, 10-32 x 5/8-in., panhead Phillips
2
Retainer nuts, 10-32
