20
Operating instructions for PODOLOG NOVA 3s | REV. 0
5.1
PREPARATIONS FOR OPERATION
-
Before starting up, remove the handpiece attachment from the handpiece.
The device must not be operated with the handpiece attachment. Keep the
handpiece attachment for the handpiece cleaning.
-
Open the dust filter bag drawer by pulling on the hose connector.
- Please check if the supplied filter bag has been inserted*.
-
Close the drawer by sliding it in.
- Switch to stand-by mode using the power switch located on the rear of the
device . Wait around 3 seconds before pressing the stand-by button on the
glass front panel.
= OFF (power switch off) = ON (power switch on)
= Standby button on/off
*If this is not the case, connect the filter bag to the sleeve. Please refer to page 32.
