Ruck ETA K 1200 F O, Assembly And Operating Manual

Page: 24 / 68

24
9:51
9:51
9:51
9:51
9:51
0% 4%
21,0°C
9:51 XXX
9:51
600 HW
600 HE
600 VW
600 VE
600 FW
600 FE
9:51
P13
TYP
ETA K-S
P29
ETAK-TYP
600 HW
P29
ETAK-TYP
600 HW
P14
W/O EXT.SENSOR
CO2
VOC
HUMIDITY
EXT.CTRL.
P 13 ETA K-S
Variable control with constant volume operation
When confirming constant air volume control, the following parameters have to be adjusted/checked.
P 14 without external sensor
Constant air volume control active
9.7. Menu level Operating parameters (qualified personnel) ETA K
Factory setting
also available for selection
9.7.1. Control type ETA K-S: Constant volume flow control
P 29 ETA K-TYP
HW / HE / VW / VE / FW / FE
Factory setting
SENSORTYPE
W/O EXT.SENSOR
Factory setting
You can access the Commissioning level by selecting the „Settings“ icon. The display then shows
the selection menu.
Selection menu
Now you can access the Operating parameters by touching the „Operating parameters“ icon.
It is necessary to provide a password. This will remain valid for 30 min. After 30 minutes it is neces -
sary to retype the password in order to continue making changes.
Password: 0213 (is shown as XXX near the time)
Now you have to select „Operating parameters“ again.
Sensor type -W/O EXT.SENSOR-