Ruck ETA K 1200 F O, Assembly And Operating Manual

Page: 19 / 68

19
C
9:51
1
2
3 4
B
A
5
9:51 9:51
0% 4%
21,0°C
9:51
English
www.ruck.eu
• Check all electrical connections and wiring.
• Check any electrical, switching, safety and control devices connected.
• The unit may not be switched on when the housing is open.
• Measure electricity consumption at operating speed and compare with the rated current.
• Check the fan for excessive vibrations and noise generation.
9.1. Control unit general
A) Control unit
B) Display: Operating display
1) ON/OFF selection:
2) Setpoint temperature:
3) Fan steps:
4) Settings:
5) Display: current time
C) Control cable
The control unit allows the selection and the command of various unit functions. The control unit
has an integrated temperature sensor (set-point sensor) for measuring the room temperature. The
display shows the various operating parameters and error messages. You can switch between dis -
playing different menu points and make changes to your unit settings and values.
Fig. 14:
Control unit
Selection Timer DAY/NIGHT
Selection Actual values
Selection Timer ON/OFF
Selection Timer activation
Selection Language
Selection Setting actual time
Commissioning level
(qualified personnel)
Display user level
Selection OK
Selection Operating parameters
Selection Commissioning parameters
SELECTION MENU
OPERATING DISPLAY
Operating display
unit OFF
Operating display
unit ON
9.2. Menu functions