17
1.
Bring the machine to an appropriate place for tanks
draining.
2.
Unscrew the solution tank cap (1).
3.
Unscrew the exhaust plug (2) being careful not to lose
or to damage the gasket.
4.
Rinse with a water jet the tank.
5.
Rinse the solution tank filter placed inside the exhaust
plug, under the machine.
TWO-MONTHLY MAINTENANCE
Front squeegee rubber replacement
Check the wear of the squeegee rubber and eventually
replace it.
For the replacement it is necessary to:
1.
Take off the squeegee hose (3) from its coupling.
2.
Disassemble the squeegee from the support rotating the
lever (2) counterclockwise and sliding the stud bolts
(1) in their slots.
3.
Uncouple the hook (1) of the rubber holder blade,
release the extremities (2) from the squeegee body and
take off the rubber (4).
4.
Unscrew the wing nuts (5) in the upper part of the
squeegee.
5.
Slip off the lower part (6) of the squeegee body, so to
take off the front rubber (7).
6.
Replace the front rubber.
7.
To reassemble the squeegee repeat reverse the
operations above-mentioned.
SIX-MONTHLY MAINTENANCE
Splash guard replacement
