12
PRE-CLEANING OPERATIONS
Connection of the batteries to the
machine
Plug in the batteries connector (1) to the machine connector
(2), placed in the rear part of the machine
Water carriage adjustment
The machine comes out of the factory in 3SD mode, this
makes possible to adjust the water carriage on 7 levels
depending on the machine speed.
To adjust the carriage from H1 to H7 keep pressed button
(1) and the symbol (2) will start blinking.
By pressing again button (1) the carriage level will be
selected, the carriage will be confirmed once the symbol (2)
will stop blinking.
Detergent solution carriage adjustment
The machine comes out of the factory with the 3SD
configuration, this makes possible to adjust the detergent
solution on 5 levels.
Turn on or off the pump press once the button (1).
The detergent symbol will switch from disactivated to
activated.
To adjust the detergent solution carriage keep button (1)
pressed so the symbol (2) will start blinking.
It will be possible to choose between 5 levels of detergent
solution %, depending on the water carriage (0.3%-0.6%-
1.2%-2.4%-4.5%) by pressing button (1) once.
When the symbol (2) stops blinking the % is selected.
A long usage of the machine with the empty detergent
solution tank might compromise the good operativity of the
machine.
Selecting the manual adjustment of the
detergent solution
The system is made of a parallel circuit which allows the
manual adjustment of the detergent solution flow, for a
standard operation.
To switch from a mode to
another press for a few
seconds buttons (1) and
(2) simultaneously.
On the display will be
shown the symbol related to
the mode which has being
selected
Press once button (2) to
change mode.
When the symbol stops blinking the mode is selected.
STARTING THE MACHINE
Every control is visualized on the display (1).
1.
Turn the key (2) clockwise.
2.
Check the battery type and the charge level on the
display (1).
