12
different inclination of the bristles causes excessive motor
overload or troublesome vibrations.
Recovery tank
Check that the cover of the suction filter (1) is correctly
secured, after rotating the levers and that the suction motor
hose (2) is correctly connected.
Verify also that the squeegee hose is correctly inserted into
the seats (3 and 4) and that the exhaust hose plug (5)
placed in the front part of the machine, is closed.
Clean water tank
The clean water tank is provided with an inspection opening.
This permits to clean the exit point of the water.
Be sure that the cap is well tightened after the cleaning.
The capacity of the clean water tank is indicated in the
technical data.
Open the screw plug (1) placed in the rear left part of the
machine and fill the clean water tank with clean water at a
maximum temperature of 50°C.
Detergent solution tank
The machine is equipped with a tank for the detergent
solution.
To load the detergent solution, take off the recovery tank and
unscrew the cap (1).
To drain the detergent solution at the end of the operations,
see chapter “DRAINING THE DETERGENT SOLUTION”.
