23
4.1.2
LAN
These are the settings of the LAN (Local Area Network) interface
for the Access Point. The Access Point's local network (LAN)
settings are configured based on the IP Address and Subnet Mask
assigned in this section. The IP address is also used to access this
Web-based management interface.
Figure 4-2
Get LAN IP From
Choose "DHCP (Dynamic)" if your router supports DHCP and you
want the router to assign an IP address to the AP. In this case, you
do not need to fill in the following fields. Choose "Static IP
(Manual)" if your router does not support DHCP or if for any other
reason you need to assign a fixed address to the AP. In this case,
you must also configure the following fields.
Note that you cannot choose "DHCP (Dynamic)" if you have
enabled the "DHCP Server" option on the DHCP page; the AP
cannot be both a DHCP client and a DHCP server.
