REP
Hitch Tent™ Manual
P a g e
|
11
8) Lift tent in place to allow hardware to pass the cross bar
9) Loosely assemble the retention plate, washers,
and nuts as shown left
10) Repeat steps 7-9 for the 4 intersections between
the tent and Hitch Tent’s cross bars.
11) With the tent resting on Hitch
Tent, set the spacing from the ball.
There should be
3” from the end
of the Main Support
(where the
ball threads in) to the tent.
If this
distance is to small, the tent cover
will catch when folding it into the
RubiConX™ causing damage to
your tent. If this distance is too
great, the tent will be unnecessarily
tall in the folded position.
