8
9
Operation
Plug extension cord into power cord.
Make a loop in the extension cord below the power cord
connection and slide through top of cord lock. The loop will
fit around the notch below the cord lock.
2
3
NOTE:
Fully assemble
before operating.
5
Assembly
O
P
2
1
1
O
L
E
P
2
1
2
O
3
P
L
C
2
1
4
Align slot in lower handle tube with notch in nozzle opening.
Push together firmly. Turn knob clockwise to tighten.
Align slot in top of lower handle tube with notch in carry handle.
Push together firmly. Turn knob counter-clockwise to tighten.
Align slot in upper handle tube with notch in carry handle.
Push together firmly. Turn knob clockwise to tighten.
Snap cloth bag clip onto lower handle tube.
M
5
To keep the cord out of the way while vacuuming, snap it into
the cord clip on the back of the carry handle.
L
When not cleaning, use carry handle to transport vacuum
cleaner.
I
K
1
Pull free end of extension cord up to take out slack.
OFF
ON
2
B
1
I
4
Plug extension cord into outlet. Turn power switch to “on”.
To position vacuum cleaner, use your foot to hold base while
tilting back.
ENGLISH
Note:
To ensure proper operation of the vacuum cleaner, verify that the rubber O-rings are in place and all collars are tight.
