RTS SIP-ISDN, Hardware & Software Manual, Page: 47 / 102

47
FIG. 28 REMOTE CONTROL
General
• To allow remote control of your system, please select the option
Enable Remote
Control
.
• If you want to protect your system with a password from unauthorised access, you
can activate the option
Enable ISDN Password Check
. Under
Password
you
must enter your password and confirm it under
Confirm Password
.
Authorized Numbers
• If you only want to allow ISDN remote access/control via certain telephone numbers
(e.g. support), you can enter these numbers together with a name under Authorized
Numbers .
To add an entry, please click on Add .
If you want to change already existing entries, select the desired entry with your
mouse and click on
Edit .
To delete a number, select the desired number and click on Delete . for safety reasons
you have to confirm that you really want to delete the entry.
5.5.2.2.5 Quick Dial
t.b.d.
NOTICE
There is no differentiation between upper and lower case for the password entry.
NOTICE
If no numbers are entered under Authorized Numbers, remote access is possible via
any telephone number. In this case, you should use a password to protect your system
from unauthorised use.