RTS KP-12, User Instructions, Page: 50 / 106

6-14
K P - 3 2 U s e r M a n u a l
8
Tap CLR to exit.
9
Run "Service Menu, Save Cfg", to store the new LCP-32 settings.
Service Menu, Local GPIO
If your KP-32 has an optional Connector Module, you can use this menu item to assign the GPIO
inputs and outputs. Inputs can be assigned to activate intercom keys (including group master keys
and a solo key). Outputs can be activated by intercom keys. Set up inputs and outputs as follows:
Assigning an Input to Activate a Key
1
Select
Local GPIO
, then tap PGM .
2
Input
displays.
3
Tap PGM .
4
GPI Inp #1
displays.
5
Press
⎠⎠
or .to display a different GPI input.
6
Tap PGM to select a GPI input.
7
Press
⎠⎠
to select
Talk Key
.
8
Tap PGM .
9
Tap Key
displays.
10
Tap the intercom key that you want to assign. This is the key that will activate when the GPI
input activates.
11
Tap CLR to exit, or BACK to back up and make more assignments.
12
Run Service Menu, Save Cfg", to store local GPIO settings.
Assigning an Input to Activate a Key Group
1
Select
Local GPIO
, then tap PGM .
2
Input
displays.
3
Tap PGM .
4
GPI Inp #1
displays.
5
Press
⎠⎠
or to display a different GPI input.
6
Tap PGM to select a GPI input.
7
Press
⎠⎠
to select
Group
.
8
Tap PGM .
9
By default,
Group 1
displays. Press
⎠⎠
or .to display a different group.
10
Tap PGM . An arrow will appear to indicate that the group is now selected. For example, if you
press PGM to select Group 1,
♦
Group 1
displays.
11
Tap CLR to exit, or BACK to back up and make more assignments.
12
Run Service Menu, Save Cfg, to store local GPIO settings.
Removing an Input Assignment
1
Select
GPIO
, then tap PGM .