manualshive.com logo in svg

RTS KP-12, User Instructions, Page: 105 / 106

Share
Download
RTS KP-12 User Instructions Download Page 105

39

How to Configure the RVON-1 using Telnet

set channel dest_channel

Allows you to edit the destination channel of the device the 
RVON-1 will talk with

set channel channel_codec

Allows you to edit the CODEC to be used for transferring the data 
between the two devices

set channel input_gain

Allows you to edit the input gain for the RVON-1 card

set channel output_gain

Allows you to edit the output gain for the RVON-1 card.

set the channel onhook

onhook = hang up

If the channel was already connected, going offhook will have no 
effect (it is already offhook if connected). Going onhook will 
hang up the call, and it should then try to reconnect.

If the channel was not already connected, going offhook will 
cause it to try and establish a connection. Going onhook in this 
stat will have no effect (it is already onhook if idle.

set channel offhook

offhook = connected

If the channel was already connected, going offhook will have no 
effect (it is already offhook if connected). Going onhook will 
hang up the call, and it should then try to reconnect.

If the channel was not already connected, going offhook will 
cause it to try and establish a connection. Going onhook in this 
state will have no effect (it is already onhook).

Summary of Contents for KP-12











































































































Reviews:

No comments