manualshive.com logo in svg

RTS KP-12, User Instructions

Share
Download
RTS KP-12 User Instructions Download Page 38

6-2

K P - 3 2   U s e r   M a n u a l

• AC: All-call key.

Note

For descriptions of the various key assignment types, see the "GLOSSARY".

Display Menu, Chans On

Displays an alpha list, in the 

Call waiting

 window, of all intercom ports that currently have talk 

crosspoints closed to this keypanel. Chans On is typically used to locate an open mic or other 
open audio source that needs to be shut off. The most likely cause is typically a talk key that has 
been left on at some keypanel. In this case, use the 

 ⎠⎠

  and  

   

 keys to scroll through the list of 

names. You can then press the 

Call waiting

 key to ask the person at the other end to turn off their 

talk key. 

Display Menu, Key Groups

Use the  

⎠⎠

  or  

 

  key to select Group 1, Group 2, etc. Then press 

FWD

 or 

PGM

 to display the 

group. The talk and listen LEDs of the master key will be lit red and the talk and listen LEDs for 
the slave keys will be lit green.

Display Menu, Key List

Displays and allows access to all the other assignments on the other keypanel pages that are not 
currently showing in the keypanel display. 

Display Menu, Level 2

Displays the talk level 2 assignments for all keys.

Display Menu, Listen

Displays the listen assignments for all keys. 

Display Menu, Matrix

Displays the intercom system name for all talk level 1 key assignments. In non-trunked intercom 
systems, the intercom system name is always LOCL (local). In trunked intercom systems, 
intercom system names are created in CStrunk (Intercoms menu, Names.)

Display Menu, Panel ID

Panel ID displays the calculated port number that the keypanel is connected to. The calculation is 
based on the data group that the keypanel is connected to, along with the Address switch setting 
on the keypanel. If the Address switch is incorrectly set, the wrong Panel ID will display. Panel 
ID also displays the port alpha in brackets if the port is not scroll restricted.

Display Menu, Version

Displays the firmware version of the keypanel.

Note

For firmware upgrades, contact your intercom system dealer. The KP-32 firmware can be 
upgraded from ADAMedit. In ADAMedit Help, search for "firmware update".

Summary of Contents for KP-12











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands