RTS CS9500, User Manual

Page: 7 / 95

Operation Guide RTS
Systems Division
DIP Switch (internal):
1
2
3
4
5
6
7
8
DIP Switch #2, Ring Count settings
Rings Internal DIP SW2, Switch # (down is
on, up
is off)
2
1
2
4
8
off off
on off
off on
on on
2.1.3
.
Internal DIP switch
#3:
DIP switch #3, which is located internally to the unit selects the password. It has no effect
unless password required has been enabled on DIP switch (rear
assword required is enabled, the password must be entered via DTMF by t e caller before
may This is to prevent unauthorized use of the intercom by callers.
Switches 7 and
8
select the length of the password, from
1
digit to
4
digits. If set for
1
digit,
only the first digit
of the password
is used, if set for 2 digits, then the first 2 digits are used
etc.
DIP Switch (internal):
1
Password select
2
Password select
3 Password select
4
Password select
select
6 Password select
7 Password length
8 Password length
Rev
Page 3 Telex Communications, Inc.