Operation Guide
RTS Systems Division
3.1.7 Answering
a
1.
When a line
is
ringing, the alpha numeric display or
LED
above the talk key which
is programmed for that line will
flash
rapidly.
2.
To
answer the call, first turn on the listen key, then press the talk key and speak into
the microphone or headset.
3.
If
you have been programmed
as
a default station, your panel
will
"ring"
when ever
one of the lines rings.
If
you do not have a key already programmed, the
ringing
line
will a pear
on
your incoming call key (the key farthest to the right
on
the main
To
answer, press the incoming call key and answer.
You
should copy the
key to main key position, either just before or just after you answer, so you can turn
on
the listen key to hear the caller audio.
3.2
SYSTEM SETUP
TO
RECEIVE CALLS
To
the intercom system, the
is very much like
a
key anel.
the phone lines are to
be used for outgoing calls only, then
no
programming in CS
DIT
is necessary. If users are
going to phone into the intercom from the outside, then the
needs to be configured
to allow them to use the phone line in much the same way a local user
uses
his
key panel.
Programming information for the phone line is entered into the CSEDIT software just
as if
the
were
an
ordinary key panel, by
from the main menu, then
selecting the
from the pick
of key panels.
o
erates much the same
.
way
as
a key panel, except that the "keys" are really the D
on
the users
telephone.
32.1
Auto
Answer
Mode:
To
use the
in auto answer mode, you must first enable auto answer mode on the
rear panel DIP switch, toggle number 1.
You
may
also
wish to enable Password required,
toggle number
3.
In addition, you may select the number
of
rings before the
unit
answers
(internal DIP switch
and the actual password (internal
DIP
switch
When the caller dials into the
he will hear the line ring, then the unit will answer,
and beep to request the pass word (if password re uired is enabled). The user then must
enter the password. The-unit
will
beep once to co 'rm a proper password.
If
the password
is not correct, the unit
will
beep
to
allow another
try.
Once the password has been entered, the
will
establish communications
on
key
automatically.
From
CSEDIT, this
will
be talk and listen keys
#l.
If
for exam le
the
user
were a camera operator, it
mi
ht be desirable to program the camera PL
as
and listen
on
talk and listen keys
#l.
the caller were a reporter, you might program
an
on
listen key #1, but
no
talk
on
talk key #l.
Keys 2
to
7
may also be programmed.
To
use
the other
ke
from
the phone, just press the
DTMF
button for the
key you
wish to use. For example, key
was
the camera PL, and
you have finished with the
shot,
you may press #1, which
will
toggle
off key 1.
If
master
control were pro rammed on key
#2,
you
may then press
2
and call master control.
Likewise, you
have
an
programmed on listen
3,
with
no
talk.
If
you press
3,
will hear
the
IFB.
could have an
IFB
talk
on
it,
to allow
a
caller
to
speak on
an
circuit.
Each DTMF button acts
as
if
it
were a push
off
switch. When
in
Rev
B
Page 8
Telex Communications, Inc.
Summary of Contents for CS9500
