64 System Operation
BTR-800, TR-800, TR-825
Receive 2 Screen
The Receive 2 screen allows the user to set the beltpack receive
2 frequency. This corresponds to the base station’s transmit 2
frequency. In factory-defined groups receiver 2 is not
changeable. User-programmable groups will allow the user to
change the frequency in 25 kHz steps.
•
Press [MENU] three times from the group/channel screen to
arrive at the receive 2 frequency screen.
•
(User-Programmable Groups Only) Press [SET] to edit the
frequency. The number ill start flashing. Factory-defined
groups can’t be changed, so pressing [SET] will do nothing
at this screen. User-programmed groups will start flashing
and allow the user to change the frequency in 25 kHz steps.
•
(User-Programmable Groups Only) Use the [UP]/[DOWN]
arrow buttons to change the frequency.
•
(User-Programmable Groups Only) Press [SET] to place
the beltpack on the frequency selected. If [SET] is held
down, during that time the group is displayed so the user is
aware of what group the unit has been placed. Once [SET]
is released, the unit returns to the receive 2 frequency screen
with nothing flashing.
•
(User-Programmable Groups Only) Pressing [SET] once
more will start the editing sequence over again. Pressing
[MENU] during receive 2 frequency edit will end editing
and send the user back to the receive 2 screen without any
changes.
Summary of Contents for BTR-800
