Universal Beltpack – BP-6000
Initial Setup and Configuration 21
Talk Mode Menu
The
Talk Mode
menu is used to program how the TALK button operates.
Available menu options are:
Switched (d) –
The TALK button toggles on and off as long as the button press is less the 400msec. If
the TALK button is held longer, the button does not latch on.
Press the TALK button to turn on. Press the TALK button again to turn off.
On –
The TALK button is always on. Talk cannot be turned off even when a mic kill signal
is sent.
Off –
The TALK button is always off.
Momentary –
TALK is only active as long as the button is held.
To
program TALK mode
, do the following:
1.
While in the program menu, navigate to
Talk Mode
.
[voice prompt] “Talk Mode”.
2.
Press the
TALK button
.
[voice prompt] “Switched”.
OR
Press the
TALK button again.
[voice prompt] “Off”.
OR
Press the
TALK button again
.
[voice prompt] “On”.
OR
Press the
TALK button again.
[voice prompt] “Momentary”.
3.
Exit the
Program Menu
Summary of Contents for BP-6000
