Universal Beltpack – BP-6000
Initial Setup and Configuration 19
Programming the Beltpack
Enter Program Menu
To
enter the program menu
, do the following:
1.
Put the
headset on your head
.
2.
Press and hold the
TALK and CALL buttons simultaneously
for three seconds.
IMPORTANT:
The beltpack must detect both buttons pressed together within 1/2 of a second. If the
TALK and CALL buttons are pressed more than 1/2 second apart, the PROGRAM
MENU is not entered.
3.
Release
both buttons
.
The CALL and TALK LED indicators blink once and then stay lit
.
[voice prompt] “Program Menu, Talk Mode”.
4.
Press the
CALL button
to navigate through the voice prompt menu.
Voice prompts are heard at every press of the button listing the available menu options.
5.
Press the
TALK button
to select the desired menu.
6.
Exit the
Program Menu
.
NOTE:
After 15 seconds of inactivity, the beltpack automatically exits programming mode and no
changes are saved. Each time the intercom system power is turned on, the beltpack resets to
the previous program settings.
Exit Program Menu
NOTE:
You must exit the program menu for any of the configuration modifications to take effect.
•
If the Program Menu times out and closes, any modifications made are not implemented.
•
If an incoming call is received while in the Program Menu, the beltpack automatically
exits the Program Menu without saving any modifications.
To
exit the Program Menu
, do the following:
>
While in the Program Menu, press and hold the
TALK and CALL buttons simultaneously
for
three seconds.
The CALL and Talk indicators blink once and then turn off
.
[voice prompt] “Exit”
IMPORTANT:
The beltpack must detect both buttons pressed together within 1/2 of a second. If the
TALK and CALL buttons are pressed more than 1/2 second apart, the PROGRAM
MENU is not exited.
Summary of Contents for BP-6000
