CHANGING ROTATING DIRECTION
Change the rotating direction when only tool is stopped.
The tool’s rotating direction can
be changed by Forward/reverse button (Forward/reverse buton is locked when the switch is
on).
Right direction
Push the forward/reverse button end of the left way ( for loosing or dismounting screws and
sockets).
Left direction
Push the forward/reverse button end of the right way ( for loosing or dismounting screws and
sockets).
MAINTENANCE AND CLEANING
Before any work on the machine itself, pull the mains plug.
Changing carbon brushes
Check the carbon brushes regularly. Carbon brushes must be changed in pairs.
For safe and proper working, always keep the machine and the ventilation slots clean.
If the machine should happen to fail despite the care taken in manufacture and testing, repair
should be carried out by an authorized customer services agent for
RTRMAX power tools
.
Summary of Contents for TM400-RTM156
