RTRMAX TM400-RTM156, Manual

Page: 3 / 12

NOTE:
THIS PRODUCT IS AVAILABLE FOR AMATEUR USING.
USING AREAS
YOUR ‘RTRMAX’ IMPACT DRILL HAS BEEN DESIGNED FOR IMPACT DRILLING
IN CONCRETE, STONE AND FOR DRILLING IN METAL, PLASTIC, WOOD AND
STEEL AND LIGHT CHIPPING APPLICATIONS.
THE DRILLS WITH ELECTRONIC SWITCH AND FORWARD/REVERSE BUTTON
ARE AVAILABLE FOR SCREWING AND CUTTING THREADS.
SAFETY INSTRUCTIONS
Read all instructions failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
•
The voltage of the power source must agree with the value given on the nameplate
of the machine.
•
Before using the tool, check the tool and it’s power connections if there is any
damagement.
•
Don’t connect the plug to power source when switch is on.
•
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
•
Extreme temperature differences cause water droplets on power conducting parts.
Before switch on the tool, wait tool to get same temperature working room
temperature.
•
Use the power tool, accessories and tool bits etc. in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into acccount the work conditions and the work to be performed. Use of the
power tool for operations different from intended could result in a hazardous
situation.
•
Fit workpieces and for fitting the workpieces, use clamping equipments or vice.
•
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loosing clothes, jewellery or long hair can be
caught in moving parts.
•
Use safety equipment. Always wear eye protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate.
•
When working with the machine, hold it firmly with both hands and provide for a
secure stance.
•
Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.