Realtimes Beijing Technology Co.,LTD
Manual for RTSO-9001 V2.0
11
2.3 Key and dial code switch
指示标识
功能描述
SW1
factory use only
SW2
Function dial code switch
3
Installation and use
3.1 picture of products
3.2 usage
a) Make sure the external system is powered off
b)
Install the TX2 core module on the RTSO-9001B J1 (400 Pin plate-to-board connector). Please pay
attention to the alignment between the connectors during the installation process, apply force evenly
and install the fixing screws.
c)
Install necessary external cables. (e.g., the display cable to the HDMI display, the power input cable
to power the system, the USB cable to link the keyboard and mouse...)
d)
Connect the power cord to the power supply.
e)
RTSO-9001 adopts the automatic power on design, turns on the power and the system starts to
work.
f)
For the system without protective enclosure, please avoid moving the whole system after the system
is powered on. It is strictly prohibited to use the body to touch the circuit board and its electronic
components.
D3
3.3V
power light
Flicker
-
power on
D4
Card status indicator light
Lighting Form
-
Loading board
to start
