Realtimes Beijing Technology Co.,LTD
Manual for RTSO-9001 V2.0
12
3.3 Recovery MODE
Jetson TX2 core module can work in normal mode and Recovery mode, under which file system
update, kernel update, Boot Loader update, BCT update and other operations can be carried out.
The steps to enter the Recovery mode are as follows:
a) Power down the device.
b)
Use USB cables to connect the lower USB port of RTSO-9001's double LAYER USB port (U4) to
the Jetson development host USB port.
c)
Stub 1 pin (FRC) and 2 pin (GND) to J12 Force Recovery interface.
d)
Power up the system. Input "LSUSB" command in the development host terminal of Linux system,
and there will be NVidia Corp device, which means the system has entered Recovery mode.
e)
Disconnect the J12 short wiring and proceed with subsequent operations.
