background image

SPECIFICATIONS

Power: USB DC 5V, 100mA.
Max Standby Current: 30uA.
Max Operating Current: 98mA in PA mode or 

40mA in normal mode.
Operating Temperature: 32ºF (0ºC) to 120ºF 

(50ºC)
Operating Distance: Up to 100 feet (30m)

NOTE: All specifications subject to change 

without notice.

DISCLAIMER

All rights are reserved. No part of this document 

may be photocopied, reproduced, or translated 

without the prior written notice of Remote 

Technologies Incorporated.
The information contained in this document 

is subject to change without notice. Remote 

Technologies Incorporated shall not be liable 

for errors or omissions contained herein or for 

consequential damages in connection with the 

furnishing, performance, or use of this guide.
Microsoft, Windows and Windows XP are 

registered trademarks of Microsoft Corporation 

in the United States and other countries.
Z-Wave  and  Z-Wave Plus  are  registered  

trademarks of  Sigma Designs and its 

subsidiaries in the United States and other 

countries
ZW-PRO, Integration Designer, and the RTI 

logo are registered trademarks of Remote 

Technologies Incorporated.
Other brands and their products are trademarks 

or registered trademarks of their respective 

holders.

Summary of Contents for ZW-PRO











Reviews: