9
It’s Under Control
®
thank you for using the XP-6 Remote Control Processor.
The XP-6 is the powerful centerpiece of any professionally installed control
system, designed to automate and enhance the operation of A/V, security,
lighting, HVAC, and countless other devices in a commercial or residential
environment. The XP-6 is packed with features to facilitate integration of
third-party devices into one seamless and cohesive system, with a variety
of communication options such as RS-22, relay, IP, and routable IR
control. Additional RTI accessories can be incorporated to allow wireless
communication between an RTI remote control and the XP-6, even through
walls or cabinets. The processor features built-in support for the RTI
-MHz receivers for one-way RF communication, or powerful ZigBee
®
2.-GHz transceivers can be incorporated for more sophisticated
bidirectional communication between the RTI controller and central
processor and supported devices.
ImPORtant nOtes
Please read these important notes about the XP-6:
The XP-6 should be placed in an area where it is around normal room
temperature (between 60°F to 90°F).
Avoid installing the XP-6 in a location where it can come in contact
with direct sunlight.
Do not let the XP-6 get wet. It should not be handled with wet hands
or placed in an area where it could get wet.
Do not subject the XP-6 to smoke, dust, or vibrations.
Only use the power supply that is specified for the XP-6. Using the
wrong type of power supply may result in damage.
Do not disassemble the unit. Service of the XP-6 should be performed
by authorized personnel only.
COmPatIbIlItY
An IR input insures compatibility with all RTI in-wall and handheld
controllers as well as industry standard IR repeater systems.
sOFtWaRe ReQuIRements
The recommended minimum system requirements needed to run the
Integration Designer
®
software are as follows:
Windows XP
®
, Windows Vista
®
, Windows 7
®
or later version of Microsoft
operating system.
CHaPteR 1 | WelCOme