![background image](http://html1.mh-extra.com/html/rti/vex100-18g-kit/vex100-18g-kit_quick-reference-manual_1497648003.webp)
VEX100-18G-KIT
QUICK REFERENCE GUIDE
Technical Support:
|
Customer Service:
03
Understanding the VEX100-18G-KIT HDBaseT Status Lights
The RTI HDBaseT extender solution includes status LED indicators on both the Transmitter and Receiver products to
show all connections are active and to help diagnose possible problems.
Understanding the status lights:
VEX100-18G-TX
•
The Yellow HDBaseT status link light will be off when the output has been turned off or there is a problem with the
HDBaseT output
•
The Yellow HDBaseT status link light will blink when the output is on and working
•
The Green HDBaseT link light will blink if there is an unstable connection between the RTI HDBaseT Transmitter and
HDBaseT Receiver
•
The Green HDBaseT link light will be lit when a there is an active HDBaseT Receiver connected to the Transmitter
•
The Green HDBaseT link light will be off when a there is no connection with a HDBaseT Receiver
•
The HDMI link light will be off when there is no connection with a source device
•
The HDMI link light will be on when there is an active connection with a source device
VEX100-18G-RX
•
The HDMI link light will be off when there is no connection with a display
•
The HDMI link light will be on when there is an active connection with a display
•
The HDBaseT link light will be off when there is no CAT cable/active HDBaseT connection on the RJ45 HDBaseT input
•
The HDBaseT link light will blink if there is an unstable connection between the RTI Transmitter and HDBaseT
Receiver
•
The HDBaseT link light will be lit when a CAT cable is connected to the HDBaseT RJ45 output on the Transmitter and
an active connection is achieved with the RTI HDBaseT Receiver
The EDID configuration can be altered using the dip-switches located on the rear panel. Please see table below for
EDID settings.
NOTE:
You must power-cycle the unit kit after changes have been made in order for the EDID settings to
update.
EDID Dip-switches
[DIP]=0000:
HDMI 1080p@60Hz, Audio 2ch PCM
[DIP]=0001:
HDMI 1080p@60Hz, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=0010:
HDMI 1080p@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=0011:
HDMI 1080i@60Hz, Audio 2ch PCM
[DIP]=0100:
HDMI 1080i@60Hz, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=0101:
HDMI 1080i@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=0110:
HDMI 4K@60Hz 4:2:0 + 4K@30Hz 4:4:4, Audio 2ch PCM
[DIP]=0111:
HDMI 4K@60Hz 4:2:0 + 4K@30Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=1000:
HDMI 4K@60Hz 4:2:0 + 4K@30Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=1001:
HDMI 4K@60Hz 4:4:4, Audio 2ch PCM
[DIP]=1010:
HDMI 4K@60Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=1011:
HDMI 4K@60Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=1100:
DVI 1280x1024@60Hz, Audio None
[DIP]=1101:
DVI 1920x1080@60Hz, Audio None
[DIP]=1110:
DVI 1920x1200@60Hz, Audio None
[DIP]=1111:
Copy EDID from output
Adjusting The EDID Settings